ETUSIVU   |   TOIMITUSEHDOT   |   YHTEYSTIEDOT   |   
       
  
                                                      
   Ostoskorissa 0 tuotetta  

Interlaboratory Proficiency Test 08/2015. Metals in waste waters and sludge
ISBN (pdf):978-952-11-4560-5 
Julkaistu:2016 
Julkaisusarja ja numero:Suomen ympäristökeskuksen raportteja 11/2016 
Kieli:englanti 
Kustantaja:Finnish Environment Institute 
Saatavuus (pdf):http://hdl.handle.net/10138/160817 
Sivumäärä:145 
Tekijät:Riitta Koivikko; Mirja Leivuori; Timo Sara-Aho; Teemu Näykki; Keijo Tervonen; Sari Lanteri; Ritva Väisänen; Markku Ilmakunnas  

60.00 €

Proftest SYKE carried out the proficiency test (PT) for analysis of elements in waste waters and sludge in October 2015. The measurements were: Al, As, B, Cd, Co, Cr, Cu, Fe, Hg, Mn, Mo, Ni, Pb, Sb, Se, V, and Zn. Additional measurands for sludge were: Sn, Ntot, Ptot, Stot, and dry weight. Four sample types were: synthetic, municipal and industrial effluents as well as sludge samples. In total 23 laboratories participated in the PT. In this proficiency test 90 % of the results were satisfactory when deviations of 5 - 30 % from the assigned values were accepted. Basically, the metrologically traceable concentration, calculated concentrations or the robust mean or mean of the results reported by the participant were used as the assigned values for measurements. The evaluation of the performance of the participants was carried out using z score. In some cases the evaluation of the performance was not possible e.g. due to the low number of the participants or the high deviation of reported results.


Takaisin